Spherical Roller Bearings 35mm ID x 80mm OD x 21mm Wide

35mm Bore Spherical Roller Bearings

  • SKU: -21307

Product Details

The outer ring raceway of self-aligning ball bearings forms a spherical surface whose centre is common to the bearing centre. The inner ring of the bearing has two raceways. The balls, cage, and inner ring of these bearings are capable of shifting in order to compensate for a certain degree of misalignment with the outer rings. As a result, the bearing is able to align itself and compensate for shaft/housing finishing unevenness, bearing fitting error, and other sources of misalignment. Since axial load capacity is limited, self-aligning ball bearings are not suitable for applications with heavy axial loads.
In addition to spherical roller bearings with cylindrical bores, spherical roller bearings with tapered bores are also available. Bearings with tapered bores are specified by the suffix “K” at the end of the spherical roller bearing part number. The standard taper ratio is 1:12 for bearings with a “K” suffix.

Product Specifications

inside dia id (mm)35
outside dia od (mm)80
width (w) (mm)21
Model RefNameUOIPrice (ex. VAT)StockQty
-21307Spherical Roller Bearings 35mm ID x 80mm OD x 21mm Wide1 £68.24 In Stock
-22207Spherical Roller Bearings 35mm ID x 72mm OD x 23mm Wide1 £66.69 In Stock
-22207KSpherical Roller Bearings 35mm ID x 72mm OD x 23mm Wide1 £66.69 In Stock

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK